SHINOLA 3540.D, Manual

Page: 9 / 90

16 17
CHRONOGRAPH MODEL 3540.D
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
I
(= normal position).
- the three chronograph hands are
precisely at zero position following
activation of push-button B . If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero.)
SETTING THE TIME
1 Pull out the crown to position III .
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back into position I .
SETTING THE DATE
1 Pull out the crown to position II .
(The watch continues to run.)
2 Turn the crown anticlockwise until
the correct date appears.
3 Push the crown back into position I .
II I
1
2
3
II III I
3
1
2
A
Minute hand
Date
Center stop-second
1/10 Second counter
(Becomes an hour
counter after 30 minutes)
Hour hand
Minute counter
Second hand
B
I
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO
1 Pull crown out to position III .
(All three chronograph hands are in
their correct or incorrect zero position.)
2 Keep push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by 360°
- corrective mode is activated.)
3 Press push-button A to single step the
center stop-second hand. Press and
hold push-button
A
to advance the center
stop-second hand quickly.
3b Press
push-button B to advance to the next hand.
4 Press push-button A to single step the hour counter hand.
Press and hold push-button A to advance the hour counter
hand quickly.
4b
Press push-button
B to advance to the next hand.
5 Press push-button A to single step the minute counter hand. Press
and hold push-button A to advance the minute counter hand quickly.
6 Return the crown to position I .
BASIC FUNCTION (START / STOP / RESET)
Example
1 Start: Press push-button A .
2 Stop: to stop the timing, press push-button A
once more and read the three chronograph
counters: 4 min. / 38 sec. / 7⁄10 sec.
3 Zero positioning: Press push-button B .
(The three chronograph hands will
be reset to their zero positions.)
1
2
3
A
B
II III I
1
2
3
4 5
6
2
A
B
3b
4b