Shinko DCL-33A Instruction Manual Download Page 25

Page: 25 / 56

Character

Name, Description, Setting Range

Factory Default

Control output OUT1/EVT

OUT1

• OUT1 or EVT terminals can be selected for control output OUT1.

If OUT1 is selected, the output terminals will be as follows.

Control output OUT1: O1 terminals (

③

④

)

Event output:

EV terminals (

⑧

⑨

)

If EVT is selected, output terminals will be as follows.

Control output OUT1: EV terminals (

⑧

⑨

)

Event output:

O1 terminals (

③

④

)

Select

(EVT) if control output OUT1 is used as Open collector output.

• Not available for direct current output.
•

: OUT1

: EVT

Heater burnout alarm output Enabled/Disabled

Enabled

• Selects whether EVT output is used for Heater burnout alarm output.

If Heater burnout alarm, Loop break alarm and Alarm (1- 4) output are set to
“Enabled”, they utilize common output terminals.

• Available only when Heater burnout alarm (W option) is ordered.
•

: Disabled

: Enabled

Loop break alarm output Enabled/Disabled

Enabled

• Selects whether EVT output is used for Loop break alarm output.

If Loop break alarm, Heater burnout alarm and Alarm (1 - 4) output are set to
“Enabled”, they utilize common output terminals.

• Available only when Heating/Cooling control (DC option) is ordered.
•

: Disabled,

: Enabled

Alarm 1 output Enabled/Disabled

Enabled

• Selects whether EVT output is used for Alarm 1 output.

If Loop break alarm, Heater burnout alarm, Alarm 2, Alarm 3 and Alarm 4 output are
set to “Enabled”, they utilize common output terminals.

• Not available if Heating/Cooling control (DC option) is ordered.
•

: Disabled

: Enabled

Alarm 2 output Enabled/Disabled

Disabled

• Selects whether EVT output is used for Alarm 2 output.

If Loop break alarm, Heater burnout alarm, Alarm 1, Alarm 3 and Alarm 4 output are
set to “Enabled”, they utilize common output terminals.

• Not available if Heating/Cooling control (DC option) is ordered.
•

: Disabled

: Enabled

Alarm 3 output Enabled/Disabled

Disabled

• Selects whether EVT output is used for Alarm 3 output.

If Loop break alarm, Heater burnout alarm, Alarm 1, Alarm 2 and Alarm 4 output are
set to “Enabled”, they utilize common output terminals.

• Not available if Heating/Cooling control (DC option) is ordered.
•

: Disabled

: Enabled

Summary of Contents for DCL-33A

























































Search results

Summary of Contents for DCL-33A

Reviews:

Related manuals for DCL-33A

Brands by name

Popular brands

Shinko DCL-33A, Instruction Manual

Search results

Summary of Contents for DCL-33A

Reviews:

Related manuals for DCL-33A

Brands by name

Popular brands