SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.5 - User Manual –
Nov
2020
75
●
Adjust the brightness sensitivity
●
Ensure that the markers are captured well.
Exit Preview mode and start the scan
Or press
Click Start in software or press the Play button to exit the preview mode and start the
scan
⚠Notes:
Preview mode will start every time a new project is built or an existing project is
imported.
After exiting preview and starting the scan, the preview mode will not show
again for this scanning project.
To access preview mode on a current project, reopen it.
7.3.2.
Scan Distance
The rangefinder on the left side reveals different colors based on the distance
between the scanner and the object. At the correct distance, it will show green. It
shows red if the distance is too close or blue if it is too far.
On the scanner, the information displays on the colored LED. If it is too close it will
show red and if it is too far it will show blue. Green shows it is a good distance away
from the object.
Adjust the scanner position until the rangefinder color turns green.
HD
Closer limit (mm)
410
Optimal distance (mm)
510
Upper limit (mm)
610
