SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.5 - User Manual –
Nov
2020
47
5.2.
Scan with Fixed Mode
5.2.1.
Capture
Click the button or press
space bar
to start scanning
Click the pause button, and the scanning will pause; Click again to resume
scanning.
When the scan is completed the data is automatically saved in the project file. Make
sure the relative position does not change during the scan.
During the scan you should see LED flashing followed by projected stripes.
5.2.2.
Edit Scan
After the single scan is completed you can edit the data.
SHIFT + Left mouse:
Select unwanted points, the selected points will turn red, as
shown below.
Ctrl + Left mouse:
Deselect selected data.
Edit buttons:
①Deselect
②Revert
③Delete
④Undo
⑤Show/Hide texture (color pack only)
⑥Shift + Left mouse: choose data
⑦Ctrl + Left mouse: deselect selected data
Delete selected data
Click the button or the “DELETE” key on the keyboard to delete selected
data.
Undo
You can only undo the most recent deleted data.
Show/Hide Stripes (for data with color texture only)
Click the button to switch the texture option between display and hide.
Press the
space bar
on the keyboard to save data and exit the single-scan
editing. The edited data is saved in the project file