SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.5 - User Manual –
Nov
2020
102
Tips:
Start from data reposition (offset to 0,0,0)
Edit rotations prior to transformation
Change the view normal to a reference plane to change the corresponding angle
3-2-1 Movement
Prior to 3-2-1 movement, the creation of a plane, line not normal to the plane and
point are required.
3-2-1 movement (plane-line-point alignment) aligns the data by deletion of the
Degrees of Freedom.
The arrows represent the global coordinate system, Red=X+, Green=Y+, Blue=Z+
3-2-1 Movement menu
Select a Plane in the drop-down menu, match it to the first axis in the Method
drop-down. The arrows on the corners of the plane represent the plane positive
direction. The normal vector of the plane will match the axis direction.
Select a Line in the drop-down menu, match it to the first axis in the Method
drop-down. Beware the direction of the line to match it to the + or - axis. The
projection of the line to the first plane will be parallel to the corresponding axis