Shining 3D EinScan HX User Manual Download

Page: 77 / 83

EinScan HX User Manual

Geomagic Design X

Export data to Geomagic Design X

Mainly used for reverse design. If the GeomagicDesign X has been installed, clicking this button will

open the GeomagicDesign X and import the mesh data.

Solid Edge SHINING 3D Edition

Export data to Solid Edge SHINING 3D Edition

Solid Edge SHINING 3D Edition is a 3D CAD software. If Solid Edge SHINING 3D Edition has been

installed, clicking this button will open the Solid Edge SHINING 3D Edition and import the

encapsulated stl data into Solid Edge SHINING 3D Edition.



The third-party software should be installed and activated in advanced.



Solid Edge Shining 3D Edition is included in the scanner. Please follow the license card to activate the software.



The rest above mentioned software are not included. Please contact us if you are interested to buy.

3.9.5 Preview Model

Double-click the

Preview Tool

shortcut on the desktop

Or open the Model Preview Tool in the start menu, i.e., start menu>Shining3d_Freescan UE>Preview

Tool. As shown in the figure below:

Figure 3-66 Preview Tool

Drag the file into the window to preview it:

Summary of Contents for EinScan HX




















































































Search results

Summary of Contents for EinScan HX

Reviews:

Related manuals for EinScan HX

Brands by name

Popular brands

Shining 3D EinScan HX, User Manual

Search results

Summary of Contents for EinScan HX

Reviews:

Related manuals for EinScan HX

Brands by name

Popular brands