31(36)
1. Remove the fixed blades
Caution!
To avoid self rotation, block the rotating blade with a thick wood block.
1) Remove the set screws.
2) Remove the fixed blades.
3) Clean the installation surface of the blade.
Picture 6-10
：
Dismantle Fixed Blades
2. Remove the rotating blades
1) Open the cutting chamber and loosen inner hex screw on bearing block.
2) Take out blade rest.
3) Clean the whole rotating blades and cutting chamber.
Picture 6-11
：
Dismantle Rotating Blades
Caution!
Press the pressing block and blade when you remove the last screw so to
avoid personal injuries.
3. Install the Blades
Clean carefully the fixed blades and rotating blades and then install them.
Attention!
