13(36)
2. Structural Features and Working Principle
2.1 General Description
SG-L series belong to the granulator used beside the IMM, which are designed for
injection molding machine to crush a small amount of materials. Don
’
t put too
many materials into crushing. The granulators are controlled by main power
switch, emergency stop button, start button, stop button and safety switches.
2.1.1 Working Principle
A
B
C
D
E
Parts name
：
A. Feed box B. Staggered blade C. Fixed blade D. Teeth blade
E. Storage box
Picture 2-1
：
Working Principle
The materials are dropped into the cutting chamber via the feed box (A). The
block materials are crushed by the staggered blades (B) and fixed blades (C) first,
and then are granulated into even particles by the teeth blade (D) and fixed blade
(C) without the screen. After granulating, the particles will directly drop into the
storage box (E); The cutting chamber is easy to open for cleaning and
maintenance. After this, the granules are ready for re-use in the production
machine, or to be transported to a container for later use.
