27(36)
1) Install the right bearing seat, bearing sleeve and bearing retaining ring.
2) Put the blade rest 2 into the cutting chamber 1 to make the bearings at
both ends match with the lower groove of the bearing seat.
3) Fix the left and right bearing seats 3 with screws on the left and right end
plates.
4.
Picture 6-3
：
Installation of Bearing and Blade Rest 3
Caution!
The blades must be placed steady, and prevent the blades from
self-rotating during installation.
The blades must be placed steady, and keep your hands away from the
blades to prevent human injury.
6.2 Installation of Motor
Warning
！
As to avoid cutter shaft auto-rotating, it should use a thick wood to fasten the
rotating blade when installing the gear motor.
1) Disassemble the chain coupling KC-5016 apart, and remove the chain.
Then, install both coupling ends on the gear motor and main shaft end.
