29(36)
Be careful
！
The blades must be placed steady, and prevent the blades from
self-rotating during installation. When operating, keep your hands away
from the cutters to prevent personnel injury.
6.3
Installation of Feed Box and Storage Box
1) Install the feed box hinge on the left bearing seat of the cutting chamber,
and fix it with M8 screws.
2) Lift up the feed box onto the cutting chamber, and use the feed box
rotating shaft and retaining ring to connect the feed box and hinge.
Picture 6-7
：
Installation of Feed Box, Feed Port and Storage Box 1
3) After installing the upper parts, hold up the storage box with both hands,
and push it gently along the feed box
’
s fixing plate.
Picture 6-8
：
Installation of Feed Box, Feed Port and Storage Box 2
Note
：
Each set screw must be locked with the correct torque.
