31(41)
4) Check that the star knobs on the hopper and screen frame locks are fully
tightened.
5) Start the machine.
6) Check that the granulator motor rotates in the direction indicated by the
arrow on the cutter pulley.
7) If any direction of rotation should be incorrect:
a) Stop.
b) Switch off the main power.
c) Change two income wires of the motor.
d) Restart and recheck.
4.3 Start / Stop of the Machine
SG23E / 30E series of granulator use the start and stop button located on the
control panel for controlling.
Picture 4-1: Start / Stop of the Machine
Note: Never stop the granulator before any material in the
hopper or cutter chamber is completely granulated.
Residusal material will clog the rotor in the granulator during
restart. The motor will be overloaded and the overloading
protection will trigger.
