12(41)
Never remove protective sponge or quick coupling clips adjacent to the
outlet of storage bin.
Make sure the power has been cut off before opening the feed box.
Air inlet dust clean.
Attention!
No need for regular inspection because all the electrical parts in the control
unit are fixed tightly!
1.4.2 Transportation and Storage of the Machine
Transportation
1) SG-23E/30E series of granulators are packed in plywood cases with
wooden pallet at the bottom, suitable for quick positioning by fork lift.
2) After unpacked, castors equipped on the machine can be used for ease of
movement.
3) Do not rotate the machine and avoid collision with other objects during
transportation to prevent improper functioning.
4) The structure of the machine is well-balanced, although it should also be
handled with care when lifting the machine for fear of falling down.
5) The machine and its attached parts can be kept at a temperature from
-25
℃
to +55
℃
for long distance transportation and for a short distance,
it can be transported with temperature under +70
℃
.
Storage
1) SG-23E/30E series should be stored indoors with temperature kept from
5
℃
to 40
℃
and humidity below 80%.
2) Disconnect all power supply and turn off main switch and exigency stop
switch
3) Keep the whole machine, especially the electrical components away from
water to avoid potential troubles caused by the water.
