OFI-20A Optical Fiber Identifier
Quick Reference
Figure. Product Simple Figure
Function Description
①
Clamp
Clamp and keep the fiber in a suitable location.
②
Clamp Pushing Button
Push the button up and press downward to fix the adapter head.
Press the button again to loosen the adapter head.
③
LED illuminator
The LED illuminator indicates the direction of traffic.
④
Low Battery illuminator
Green: Full Battery; Orange: Low Battery which can be for current test and need to
change battery; Red: Must change battery and cannot test
Selecting Adapter
①
Select the appropriate adaptor head according to the different types of fiber
②
Insert the fiber to the adapter head when using the Ø2.0 and Ø3.0 connectors
③
Insert the fiber to the groove on the clamp when using the Ø900 and Ø250
connectors
On/Off
①
Push up the “clamp pushing button” to turn on the unit
②
Loosen the “clamp pushing button” to turn off the unit
Optical Fiber Identification
①
Insert the fiber to the adapter head and push the button up to lock clamp.
②
When a CW signal passes the fiber, the LED illuminator will indicate the
traffic’s direction arrow and a relative core power readout will be displayed.
③
If no optical signal passes the fiber, the LED illuminator is dead and the “LO”
will be displayed in the relative core power position.
④
Fiber identifier can also detect the presence of a 2KHz, 1KHz and 270Hz
modulated signal. When a modulated signal is detected the appropriate signal LED
will be illuminated, the LED illuminator will indicate the traffic direction arrow
and relative core power readout will be displayed. In addition a pulsed audible tone
will be heard.
Maintenance
①
The fiber should be put in the groove according to the specific type.
②
Please use the cotton swabs to clean the detector surface regularly to keep it
Detector
Groove on the clamp
Adapter head groove
Relative Core Power
Display
LED
Illuminator
Clamp
Adapter
Head
Clamp Pushing
Button
Low Battery
Illuminator
