Shindaiwa DGW300MS/UK, Operator'S Manual

Page: 11 / 34

- 9 -
Caution: Burns
Do not touch the engine or exhaust during operation or immediately after
stopping the equipment, as the temperature will be extremely high.
When the water temperature rises abnormally, the coolant/water temperature
monitor lamp will flash, and the automatic engine shut-off will be engaged.
When this symptom occurs, check the coolant sub tank, and replenish if needed.
(Refer to
『
6-2. Checking coolant/water
』
)
If the water level is normal, there may be a possibility of overloading. Always
connect equipment within the rated duty cycle and output power.
(2) Battery Charge Monitor Lamp
When the battery is unable to be charged during operation, the battery charge
monitor lamp will flash and the automatic shut-off will be engaged.
<Caution>
The battery charge monitor cannot detect the degradation of the battery nor the
battery fluid level. Check the battery fluid level periodically.
(Refer to
『
6-5. Checking Battery
』
)
(3) Oil Pressure Monitor Lamp
Danger: Injuries
Close and lock all equipment doors when operating this equipment, to avoid
injuries by unintentionally touching cooling fan and fan belt.
Caution: Burns
Do not touch the engine and exhaust during operation or immediately after
stopping the equipment, as the temperatures will be extremely high.
When checking engine oil, always stop the engine, and wait until the engine
cools down. Do not open the oil gauge or the oil filter cap during operation
If the engine oil pressure drops during operation, the oil pressure monitor lamp will
flash, and the automatic shutoff will be engaged.
When this symptom occurs, check the engine oil level, and replenish to maximum
level.
<Caution>
The engine oil pressure monitor cannot detect the degradation of engine oil itself.
Please check the engine oil periodically, and change if needed.
(Refer to
『
11. Checking and Maintenance
』
)
Check the fuse next, when the abnormality, other than WATER TEMP, BATTERY
CHARGED OR OIL PRESSURE is detected. If the fuse is burned out, consult
with our dealer or authorized distributor, as there may be an abnormality of
electrical components or wiring which should be inspected.