Shindaiwa DGW300M, Owner'S And Operator'S Manual

Page: 25 / 36

- 22 -
Caution: Burns
•
Do not open the radiator cap while operating this equipment or
immediately after stopping the equipment, to avoid sustaining burns from
hot vapor.
Caution : Injuries to eyes and skin
•
Battery fluid contains diluted sulfuric acid. Avoid contact with eyes, skin
or clothing.
•
If the acid comes to contact, especially with eyes, flush with a lot of water,
and contact your physician immediately.
Caution : Explosion
•
Do not use the equipment or charge the battery, in the case the battery
fluid level is lower than the LOWER level.
•
Battery may emit some combustible gas, so keep it away from fire and
sparks.
To optimize the use of this generator/welder, we recommend the periodical
equipment checks and maintenance based on the following matrix.
Use the hour meter as a guide for the operating time.
< Caution >
•
The authorized technicians should perform all checking and maintenance work,
except for the pre-startup checks.
•
Request for the maintenance item with
●
mark to authorized distributor.
•
Always use our genuine parts of replacement.
•
When draining waste fluid from the equipment, catch it by tray.
•
When disposing of oil, fuel, coolant (LLC), fuel filter, battery and /or other harmful
disposal, please observe the relevant environmental protection regulations.
•
Please do not dispose the harmful items or waste fluid to the ground to a river,
pond, and ocean to keep our environment clean and neat.
•
Check to see if it is safe around the equipment before open the door.
•
Close all doors and place locks, if you leave from the equipment for a while.
Checking Time
Checking Items
Startup
Check
At
50hrs
Every
100
hrs
Every
200
hrs
Every
400
hrs
Every
1000
hrs
Every
2000
hrs
1 Check and Supply Fuel
○
2
Check and Supply
Engine Oil
○
3 Engine Oil Change
1
st
○
2
nd
or
after
○
4 Oil Filter Change
1
st
○
2
nd
or
after
○
5
Check/Add
Water/Coolant
○
6 Water/Coolant Change
○
or
1year