Shindaiwa DGK7F, Owner'S And Operator'S Manual

Page: 17 / 48

14
Hour Meter
5-5. Meters and Gauge
s
Engine Meters and Gauges
(1) Hour Meter
Displays the operating time. Use this as a reference for
managing periodic inspection interval.
(2) Tachometer
Displays the engine speed. 3,600 rpm is displayed at 60
Hz.
(3) Fuel Meter
Displays the amount of fuel in the internal fuel tank. When the tank is full, all the lamps are lit
up and FULL is displayed. The amount of lamps lit up decreases as the amount of fuel
decreases as it approaches EMPTY. Add fuel accordingly when only one lamp is displayed.
The fuel meter on the control panel will only display the fuel level for the internal fuel tank.
Generator Meters and Gauges
(1) Voltmeter
The voltmeter displays the single-phase output
voltage (voltage between U-W). Check that
240V at 60Hz is displayed during operation.
Indicators
(1) Pre-heating Indicator
The pre-heating indicator illuminates when the starter switch
is at START. The pre-heating indicator turns off when
pre-heating is completed. the preheating indicator turns off
and the generator starts.
< Note >

Pre-heating completes in approximately 5 seconds.
Fuel Meter
Pilot Lamp
Pre-Heating Indicator
Tachometer