Shindaiwa DGK7F, Owner'S And Operator'S Manual

Page: 30 / 48

27
9-3. Stopping Operation
CAUTION : BURNS

Do not touch the engine and surrounding components immediately after
stopping the engine as they are still extremely hot.
(1) Manual Start
Turn the switches and breakers on the load side to OFF.
Turn off the main breaker on the operation panel of this machine.
Confirm that the accessory switch is set to "OFF."
The engine cools down for approximately 3 minutes.
Turn the starter switch to STOP.
After the engine stops, turn the fuel lever to CLOSE.
< Note >

Never turn accessory switch ON during operation.The engine keeps running while accessory
switch is ON.

If the engine does not stop even if the starter switch is set to "STOP", close the fuel cock.The
engine will stop after a few minutes. If this occurs, stop using the generator and have it repaired by
the authorized distributor where this generator was purchased.

Set the starter switch selector to "STOP" if you do not plan to use the generator for a prolonged
period of time. If you leave the selector in the "AUTO" or "START" position, the standby current
may drain the battery.
(2) Auto Start
The engine stops when the remote start terminal opens.
Set the starter switch selector to "STOP," and close the fuel spigot if you do not plan to
use the generator for a prolonged period of time.
< Note >

Never turn accessory switch ON during operation.The engine keeps running while accessory
switch is ON.

Close the fuel spigot if the engine does not stop when the "REMOTE START" terminal opens. The
engine will stop after a few minutes. If this occurs, stop using the generator and have it repaired by
the authorized distributor where this generator was purchased.

Set the starter switch selector to "STOP" if you do not plan to use the generator for a prolonged
period of time. If you leave the selector in the "AUTO" or "START" position, the standby current
may drain the battery.
1
2
3
4
5
6
1
2