42
Remove the drain plug (R1”) to drain the water.
After the procedures have been completed, apply sealant coating to the plug (R1”) or
wrap it in seal tape and reinsert it.
< Note >
If the fluid drained when cleaning the spill containment contains oil or
grease, dispose of it according to the related laws and regulations.
If the spill containment has a leak, contact the authorized distributor
where the generator was purchased.
6
7
Lifting Hook
Lifting Hook
Bolt
Bolt
Bolt
Bolt
Wire Connector
Wire Connector
Position A
Position A
Union Joint
Union Joint
Wire Connector
Wire Connector
Fuel Tank
Fuel Tank
Spill Containment
Spill Containment
Washer
Washer
Washer
Washer
Fuel Line (Inlet Side)
Fuel Line (Inlet Side)
Fuel Line (Return Side)
Fuel Line (Return Side)
Drain Plug(R1”)