40
(9) Draining Water and Oil from the Intercooler
Remove the drain plug.
After the water and oil have been drained, re-install
and tighten the drain plug.
< Note >
After reinstalling the drain plug, be sure to always check to
avoid any leakage.
(10) Flushing Liquid in Spill Containment
Set a container to catch spilled liquid from the flushing port of the drain faucet on the front
of this generator.
Remove the drain plug (R1/2”) and open the drain faucet lever.
< Note >
When removing or attaching the plug, hold the drain faucet fixed using an open end wrench or similar
tool and turn the plug.
If oil or other liquid mixed in with the flushed liquid, this could be oil leakage etc. In such case, check
for the leaked location.
The types of liquids that can accumulate in the spill containment include oil, fuel, coolant water and
battery fluid such that it is not possible to distinguish between rain water and other liquids. Dispose of
flushed liquids according to the related laws and regulations.
Close the drain faucet lever after the liquid has been flushed, and apply sealant coating to
the plug or wrap it in thread seal tape.
Drain Water and Oil Every 500 hours
Check
Daily
1
2
1
2
3
Drain Plug(R1/2”)
Loosen
Tighten
Fixing
Drain Faucet
Drain Faucet
Drain Faucet
Drain Faucet
Lever
Drain Faucet
Lever
Close
Close
Open
Open
Drain Plug(R1/2”)
Drain Plug(R1/2”)
Drain Faucet Lever
Drain Faucet Lever
Intercooler
Drain Plug