Shindaiwa DG150MM, Owners And Operation Manual

Page: 35 / 48

32
1
2
3
4
6
1
2
4
5
6
7
8
5
3
Oil Level Indicator
9
Drain plug
Oil Filter
Gasket
Mark
Drain plug
Loosen
Tighten
Oil Filter Element
(1) Engine Oil Replacement
First Time 60 hrs.
Thereafter Every 250 hrs.
Place a suitable pan under the oil drain plug.
Remove the oil filler cap.
Remove the oil drain plug together with a
packing. Turn and open the oil drain valve and
drain the engine oil.
Close the oil drain valve after drained.
Retighten the oil drain plug together with a
new packing.Do not reuse the packing.
Packing part no.:V106-000210
Add oil through the oil filler until it is at the
maximum level while checking the oil level
using the oil level indicator.
Attach the oil filler cap.
< Note >
 Refer to section “
8-1. Checking Engine Oil
”
for engine oil replacement amounts and types.

After reinserting the oil drain plug and shortly
after starting the engine, be sure to always
check that there is no oil leakage.
(2) Replacing the Oil Filter
Fist time 60 hrs.
Thereafter
Every 500 hrs.
Drain the engine oil. ( Ref.
“
(1) Engine Oil
Replacement
” )
Place a suitable pan under the oil filter to collect
receive the oil when it is drained out. Remeve the
drain plug and drain the oil in the filter.
Remove the oil filter element by a filter remover.
Use the Mitsubishi genuine oil filter element. Oil filter
element part no.:ME130968 (Mitsubishi part no.)
Apply oil to the surface of the gasket.
Insert the oil filter element by hand until the gasket
contacts the seal surface. (Do not use a filter wrench.)
Turn the filter element by 1
・
1/8 to 1
・
3/8 turns to
clockwise. Use the markings in the filter element for
reference.
Add new lubricant oil. Wipe off the spilled fuel.
Start the engine. Make sure that there is no leaking the oil from the sealing point.
< Note >

Contact a local dealer if you are unsure to step the procedure above or if you do
not have a filter remover.

When attaching the Element, check that there is no foreign material adhering to
the gasket.
Oil Filler cap
Oil Drain Plug
with Packing
Oil Drain Valve
(inside)
Oil D r ain Valve
Oil Drain Plug
CLOSE
OPEN
Packing