Shindaiwa DG150MM, Owners And Operation Manual

Page: 38 / 48

35
1
2
3
6
1
2
3
1
2
3
4
5
5
4
4
(6) Fuel Filter Replacement
（
Main Filter
）
Replace Every 500 hrs.
Remove the fuel filter element by a filter remover.
Use the Mitsubishi genuine fuel filter element.
Fuel filter element part no. :ME056670(Mitsubishi
part no.)
Apply fuel to the gasket in the fuel filter element.
Install the oil filter by hand until the gasket
contacts the seal surface.
Tighten the filter by 2/3 turn to clockwise with
filter wrench.
Start the engine. Make sure that there is no
leaked fuel from the seal point.
< Note >

When attaching the Element, check that there is
no foreign material adhering to the gasket.
(7) Draining Water from the Fuel Tank
Drain Water
Every 250 hrs.
Place a suitable pan under the drain plug.
Remove the fuel drain plug together with a
packing. Turn and open the fuel drain valve and
drain the water.
Close the drain valve after drained. Retighten
the fuel drain plug together with a new packing.
Do not reuse the packing.
Packing part no.:V106-000190
Make sure that there is no leaking the fuel
from the seal point.
(8) Coolant Replacement
Replace
Every 2 yrs. or Every 1000 hrs.
(whichever come first)
Place a suitable pan under the drain hose.
Remove the radiator plate and the radiator cap.
Loosen the drain valve.
Retighten the drain valve after drained.
Remove the coolant sub-tank and drain coolant from the sub-tank, if necessary.
Coolant
Sub-Tank
Gasket
Mark
Fuel Filter Element
assembly
Radiator Cap &
Filler Neck
Radiator Plate
Drain Valve
Drain Hose
Mating Mark
Fuel filter (Main)
CLOSE
OPEN
Fuel Drain Plug
with Packing
Fuel Drain Valve
(inside)
FULL
LOW