background image

3

Work Safely

Trimmers  and brushcutters operate 

at very high speeds and can do serious 

damage or injury if they are misused 

or abused. 

Never allow a person with-

out training or instruction to operate this 

unit!

Stay Alert

You must be physically and mentally fit 

to operate this unit safely.

Safety

WARNING!

Never make unauthorized 

attachment installations.

WARNING!

Never oper-

ate power equipment of 

any kind if you are tired or if you 

are under the influence of alcohol, 

drugs, medication or any other sub-

stance that could affect your ability 

or judgement.

WARNING!

Use Good Judgment

Safety Labels

IMPORTANT!

Safety and Operation Information Labels: Make sure all 

information labels are undamaged and readable. Imme-

diately replace damaged or missing information labels. 

New labels are available from your local authorized 

Shindaiwa dealer.

ALWAYS 

inspect unit before each 

use. Replace any damaged parts.

NEVER

 run the engine when trans-

porting the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventila-

tion. Fumes from engine exhaust can 

cause serious injury or death.

ALWAYS

 stop the unit immediately if 

it suddenly begins to vibrate or shake. 

Inspect for broken, missing or improp-

erly installed parts or attachments.

NEVER

 extend trimming line beyond 

the length specified for your unit.

ALWAYS

 keep the unit as clean as 

practical. Keep it free of loose vegeta-

tion, mud, etc.

ALWAYS

 hold the unit firmly with both 

hands when cutting or trimming, and 

maintain control at all times.

ALWAYS

 use the proper cutting tool for 

the job.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark plug 

wire before performing any mainte-

nance work.

ALWAYS

, if a saw blade should 

bind fast in a cut, shut off the 

engine immediately. Push the 

branch or tree to ease the bind and 

free the blade.

This label indicates the minimum distance between 

front handle and rear grip per ANSI B175.3.

WARNING!

The ignition components of this machine generate an electromagnetic field during operation which may interfere 

with some pacemakers.  To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their 

physician and the pacemaker manufacturer before operating this machine.   In the absence of such information, ECHO 

does not recommend the use of ECHO products by anyone who has a pacemaker.

Summary of Contents for C282

































Reviews: