background image

ECHO Incorporated.

400 Oakwood Road

Lake Zurich, IL 60047-1564  U.S.A.

Telephone: 1-877-986-7783

Fax: 1-847-540-8416

www.shindaiwa.com

 

Yamabiko Corporation

7-2 Suehirocho 1-Chome, Ohme, 

Tokyo, 198-8760, Japan

Phone: 81-428-32-6118   

Fax: 81-428-32-6145

Servicing Information

Parts/Serial Number

 

Genuine Shindaiwa Parts and Assemblies for your Shindaiwa products are available only from an Authorized 

Shindaiwa Dealer.  When you do need to buy parts 

always

 have the Model Number, Type and Serial Number of the 

unit with you.  You can find these numbers on the engine.  For future reference, write them in the space provided 

below. 

Model No. _____________  

SN. ______________

Service

Service of this product during the warranty period must be performed by an Authorized Shindaiwa Service Dealer.  

For the name and address of the Authorized Shindaiwa Service Dealer nearest you, ask your retailer or call: 1-877-

986-7783

  Dealer information is also available on WWW.SHINDAIWA.COM. When presenting your unit for Warranty 

service/repairs, proof of purchase is required.

Consumer Product Support

If you require assistance or have questions concerning the application, operation or maintenance of this product you 

may call the Shindaiwa Consumer Product Support Department at 1-877-986-7783 from 8:30 am to 4:30 pm (Central 

Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.

Warranty Registration

 

To ensure trouble free warranty coverage it is important that you register your Shindaiwa equipment by filling out the 

warranty registration card supplied with your unit. Registering your product confirms your warranty coverage and pro-

vides a direct link if we find it necessary to contact you.

Additional or Replacement Manuals

 

Replacement Operator and Parts Catalogs

 are available from your Shindaiwa dealer or at WWW.SHINDAIWA.COM 

or by contacting the Consumer Product Support Department (1-877-986-7783). Always check WWW.SHINDAIWA.

COM for updated information.

Copyright© 2012 By Echo, Incorporated

All Rights Reserved.

T10011001001/T10011999999

T09912001001/T09912999999

Summary of Contents for C282

































Reviews: