C262
OPERATION
X7502341302
25
©
02/21
ECHO Incorporated
Balance and Adjust Unit
1.
Loosen harness clamp screw.
2.
Put on harness and attach unit
to harness.
3.
Slide harness clamp up (A) or
down until unit balances with
head approximately 50-75 mm
(2-3 in.) from the ground.
4.
Tighten harness clamp screw.
5.
Loosen upper U-Handle clamp
screws (B), and position
U-Handle for comfortable
operation.
6.
Tighten U-Handle clamp screws and 8 mm clamp hex bolt securely.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.
B
A
