C262
ASSEMBLY
X7502341302
21
©
02/21
ECHO Incorporated
Shield Installation
(blade operation)
1.
If installed remove nylon line
head and shield with cutoff
knife.
a.
Align hole in upper plate
with notch in edge of gear
housing and insert head
locking tool (H).
b.
Remove line head (I) by
turning it clockwise until
head is completely off of
shaft.
c.
Remove locking tool (H).
d.
Loosen bolt and nut (J, K)
holding shield with cutoff
knife to shield base.
e.
Press tab (L) and slide
shield off shield base.
f.
Retain line head and shield
with cutoff knife for
conversion back to nylon
line head operation.
Parts Required:
Shield without cutoff knife
I
H
H
J
K
K
L
L
J
