Shindaiwa C225S, Operator'S Manual

Page: 44 / 188

42
Specifications
Specifications
These specifications are subject to change without notice.
T225S C225S
Mass:
Unit without cutting attachment, empty tank
Unit with specified cutting attachment, empty tank
Unit with specified cutting attachment, full tank kg
kg
kg 5.2
5.3
5.5 5.2
5.5
5.8
Volume: Fuel tank L 0.4
Cutting attachment:
Nylon line cutting head
Line diameter
Line length
Thread
Specified blade diameter
Specified blade thickness
Number of cutting teeth
Blade centre hole diameter
Blade rotational speed at maximum allowable engine
speed
mm
m
mm
mm
mm
r/min
G138
3.0
2 ×1 line
Left-handed M10×1.25
-
-
-
-
-
-
-
-
230
3.0
3
25.4
7720
Gear ratio: Gear ratio and lubrication 1.36 reduction and good quality lithium grease
Rotational direction of output shaft seen from above: Anticlockwise
External dimensions:
Length
Width
Height mm
mm
mm 1760
345
320 1760
655
420
Engine: Type Air cooled 2-stroke single cylinder
Engine displacement
Maximum shaft brake power, measured in accordance
with ISO 8893
Engine speed at maximum engine power
Recommended maximum engine speed
Recommended engine idling speed
mL (cm
3
)
kW
r/min
r/min
r/min
21.2
0.62
7000
8800
3000
10500
Carburettor
Ignition
Spark plug
Starter
Clutch Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter
Automatic centrifugal clutch
Fuel:
Oil
Ratio
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC,FD grade and
Shindaiwa One 50 : 1 oil.
50 : 1 ( 2% )
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power L/h
g/(kW•h) 0.46
544
Sound pressure level: (ISO 22868) LpAav = dB(A) 90 88
Guaranteed sound power level:
(ISO 22868) L
WA
= dB(A) 105 104
Vibration levels: (ISO 22867)
m/s
2
m/s
2
Front handle 5.2
Rear handle 5.8 Left handle 2.9
Right handle 2.0