Shindaiwa 501SX, Owner'S/Operator'S Manual

Page: 22 / 136

22
Service maintenance guide
Area Maintenance Page Before use Monthly
Air filter Clean / Replace 26 •
Fuel system Inspect 26 •
Fuel filter Inspect / Clean / Replace 26 •
Oil filter Inspect / Clean / Replace 26 •
Spark plug Inspect / Clean / Adjust / Replace 26 •
Cooling system Inspect / Clean 27 •
Guide bar Inspect / Clean 27 •
Sprocket / Clutch drum Inspect / Replace 27 • •
Carburettor Adjust / Replace and adjust 27 •
Silencer Inspect / Tighten / Clean 28 •O
Chain brake Inspect / Replace 16 •O
Starter rope Inspect - •
Screws, bolts and nuts Inspect, Tighten / Replace - •O
WARNING

If not maintained properly, the product may pose a serious risk to physical health.
CAUTION
Before and after using the product, check the antivibration rubber or spring for making sure that it is not worn, cracked,
or deformed.
NOTE
If not maintained properly, the product's performance may deteriorate.
IMPORTANT
Time intervals shown are maximum.
Actual use and your experience will determine the frequency of required maintenance.
If your saw is subjected to high loads due to a fall or impact, inspect each part.
If you continuously use vegetable based chain oil, inspect and do maintenance often.
When you find anything wrong, ask your shindaiwa dealer for repair.