background image

C.

D.

A.

B.

MAC 538E / MAC 539E

38 CC

MAC 540E / PROMAC 40 II

40 CC

MAC 542E / CALIFORNIA

42 CC

MAC 545E / PROMAC 46 II

46 CC

P 538E / EUROMAC S42 / S44

38 CC

P 540E

40 CC

P 542E / EUROMAC S43

42 CC

P 461 II / TITANIUM 460

46 CC

PN. 249453 REV. 00 (04/04)

Electrolux Outdoor Products

Via Como 72

23868 Valmadrera (Lecco)

ITALIA

Phone + 39 0341 203111 - Fax +39 0341 581671

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and

trademarks in several countries.

© Electrolux Outdoor Products

The Electrolux Group. 

T

he world’s No

.1 choice.

The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use.  More than 55 million

Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are

sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.

Summary of Contents for CALIFORNIA










Reviews: