Danger: Failing of observing relevant rules may cause electric shock;
Warning: Failing of observing relevant rules may cause serious injury of the body;
Notice: Failing of observing relevant rules may cause product damage;
Expresses No Touching;
Expresses Must Obey;
Expresses Forbidding Act;
Expresses the Grounding Mark for electric shock prevention.
Thank you very much for choosing the product of our company. Please be sure to read the
Operation Manual carefully before installation of the product and keep it properly, and misuse of
the product will cause personal injury or property damage.
The users must strictly observe the “Notice”, “Warning” and other terms and signs contained
in the Manual.
I. Safety and Installation Precautions
Gas Pipe
The electric pump should be correctly equipped with an electricity
leakage protective device and you should ground the pump reliably
(connect the grounding wire to the marked terminal) at the grounding
mark of the electric pump or cable as well as the power socket is
connected to ground. As shown in the figure below, it is strictly
forbidden to connect the ground wire to the gas pipe or it may cause
explosion; do not wet the power plug and the power socket connected
shall be located at areas where it is not affected by dampness.
The electrical connection
must be conducted by
personnel with electrician
certificate according to the
local specifications and the
safety standards.
Statement:
SHIMGE shall not be liable for follow loss or damage suffered as a result of failure to
comply with the content of the manual
：
·
Pump failure resulting from disassembly or maintenance conducted by non-professional people
without certificate, or using the pump beyond its operating conditions;
·
Losses caused by voltage, machinery or chemistry;
·
Environmental pollution caused by pumping dangerous medium.
Grounding Wire
1
