28
< When bicycle is standing up >
LOCK
Cassette joint
bracket
Cassette joint
pulley
Should be straight
< When bicycle is upside down >
LOCK
Cassette joint
bracket
Cassette joint
pulley
Should be straight
•
If the yellow setting lines are not aligned, turn the cable adjustment bolt of the REVOSHIFT lever / shifting lever to align the
setting lines. After this, move the REVOSHIFT lever / shifting lever once more from
X
to
Y
and then back to
X
, and then
re-check to be sure that the yellow setting lines are aligned.
< REVOSHIFT Lever >
4
Cable adjustment bolt
Note
X Y
In the case of 8 gears ......... 4 1
In the case of 7 gears ......... 4 1
In the case of 5 gears ......... 3 1
< Shifting Lever >
1 ..4 ..7
Cable adjustment bolt
3.
After adjusting the cassette joint, cut off the excess length of inner
cable and then install the inner end cap.
LOCK
Inner end cap
15 – 20 mm
