20
3.
After checking that the end of the outer casing is sitting securely in the cable adjustment bolt of the REVOSHIFT lever / shifting
lever, attach the inner cable fixing bolt unit to the inner cable.
When installing the inner cable fixing bolt unit, use the setting tool TL-CJ40 (Y70898020).
For CJ-NX10 and CJ-8S20, use the front side of TL-CJ40.
Note:
The tool is shipped ready to be used for CJ-NX10 and CJ-8S20.
TL-CJ40
Front side
Nut fitting
Note:
This inner cable fixing bolt unit is designed only for CJ-NX10, CJ-NX40, CJ-8S20, and CJ-8S40. 11-speed fixing bolt units cannot
be used.
Pull the inner cable while attaching
the inner cable fixing bolt unit.
101 mm
Tightening torque:
3.5 - 5.5 N·m {31 - 48 in. lbs.}
10 mm
Pass the inner cable through the hole.
Inner cable fixing bolt unit
Inner cable fixing nut
(Black)
Inner cable fixing washer
(Silver)
Inner cable fixing bolt
(Silver)
4.
Bring the cable around to the cassette joint pulley, hold so that the inner cable fixing nut is facing to the outside (toward the
fork end), and then slide the flats part of the inner cable fixing washer into the gap in the pulley.
LOCK
Pulley
Inner cable fixing nut
Flats part of inner cable
fixing washer
Gap in pulley
