48
To restart the system, wait 1 minute after turning off power to the
X-ray generator, then press
(ON) again.
NOTE
If the acquisition monitor is blank when restarting the system
after shutdown failure, press the power button on the digital
control cabinet in the equipment room to turn on the power.
If the review monitor is blank when restarting the system after
shutdown failure, press the power button on the digital operation
cabinet in the control room to turn on the power.
After the application screen is displayed on both acquisition
and review monitors, shut down the system again by standard
procedure and then restart the system.
NOTE
Digital Angiography system application problem
■
Image processing errors or unknown system problems
If image processing errors or unknown system errors occur, the error dialog is displayed automatically.
1
Click
The application reboots.
■
Mouse Pointer
If the mouse pointer is locked within one monitor, press the [Scroll Lock] key on the keyboard.
■
Monitor
If the screen is blank or gray-scale-like image is displayed, press the button shown in the figure below.
Review Monitor
Acquisition Monitor
