Section 8 Handling of mower
45
(3) Loosen the butterfly nut of the cutting
height gauge nut, measure the clearance
between the screw head bottom and gauge
(below the screw neck) with a measure,
adjust the size to the mowing height, and
fix the screw tightening the butterfly nut.
●
This size is the grass cutting height.
(4) Loosen the nut tightening the front roller
bracket.
(5) Apply the cutting height gauge to the point
of the front roller coming in contact with the
ground and the rear roller, and adjust with
the adjusting bolt so that the screw neck
under at the gauge center is aligned with
the top surface of the lower blade.
(6) Make adjustment in the same way for both
the right and left sides.
(7) Tighten the fixing nut to fix the front roller
bracket positively.
Shibaura Europe BV
All manuals and user guides at all-guides.com
all-guides.com
