Section 6 Operation and works
34
4. Starting, turning and stopping
Warning
●
When starting the machine, give a sign to
people around the machine, make sure of the
safety and start the machine gently avoiding
sudden start. otherwise, injuries may result.
●
This machine has not acquired a sanction as
a special-purpose car and cannot travel on
general roads.
You may be punished due to violation of the
Road Traffic Act.
●
Wear a helmet during operation and when
moving the machine for safety.
●
Do not allow anybody other than the driver to
get on the machine.
●
Sudden starting, turning, stopping or
overspeed are prohibited. Operate the
machine gently.
①
How to start
Warning
●
Do not change the speed on a slope.
Otherwise, the machine may run by its own
weight causing a death or injury.
(1) Change the speed change lever to the
desired position.
(2) Lift the mower with the lifting/lowering
lever.
(3) Release the parking brake.
(4) By stepping the traveling pedal, the
machine moves.
[Caution for handling]
●
When traveling, increase the engine speed.
Otherwise, failure may result.
●
When operating the speed change lever, stop
the machine. If you operate the lever while
the machine is moving, failure may be
caused.
●
Be sure to move the speed change lever
positively to a desired position. If it is
positioned midway, gear disengagement may
result.
<Reference>
Speed may not be smoothly changed because
of the claw clutch. Speed may be changed
smoothly by operating the lever while stepping
the running pedal lightly.
②
How to turn
Warning
●
Before turning the machine, reduce the
running speed sufficiently. If you turn keeping
a high speed, the machine may turn sideways
causing injuries.
●
When making a turn, confirm the terrain of the
ground after completion of work.
③
How to stop and park
Warning
●
When leaving the machine, select a flat and
stable surface on the solid ground to park the
machine.
●
If you should stop the machine on a slope for
some reason, direct the machine sideways
and chock the front wheel.
(1) Leave your foot from the traveling pedal
and step the brake pedal. The machine
body stops.
(2) Lower the implement fully.
(3) Apply the parking brake.
5. Mowing
A control unit using a micro computer is built in
this machine to control the implement securing
high working efficiency. For more complete
operation, well understand the explanation
below before operating.
Warning
●
Remove obstacles in the field in advance.
Otherwise, the rotary blades of the mower
may be damaged and the mower main body
and the machine may fail. This is very
dangerous.
Shibaura Europe BV
All manuals and user guides at all-guides.com
