Section 4 Functions of operating components
25
③
Meters
①
Hour
meter
The hour m eter indicates the total
operation tim e. Carry out the periodical
inspections and services of the front
mower according to this figure.
The rightm ost figure show s 0.1 hour (6
minutes).
e.g. 253 4: 253.4 hours (24 minutes)
②
Water
temperature
m eter
Indicates the tem perature of the engine
cooling w ater w hen the key switch is at
the [ON] position.
③
Fuel
m eter
Indicates the rem aining fuel in the fuel
tank w hen the key sw itch is at the [ON]
position.
④
Glow lamp
●
By turning the key to the [HEAT]
position, the glow lamp lights up and
goes out about 5 seconds later.
●
After the lamp goes out, turn the key
quickly to the [START] position and
start the engine.
⑤
Engine oil pressure lamp
This lam p lights up w hen the key sw itch
is at the [ON] position. It goes out
when the engine starts, the engine oil
begins to circulate and norm al
pressure is reached.
⑥
Charge lamp
This lam p lights up w hen the key sw itch
is at the [ON] position. It goes out
when the engine starts and the batter y
is norm ally charged.
⑦
Air cleaner lamp
If this lamp lights up during operation,
the air cleaner elem ent has been
clogged. Clean the elem ent in such a
case.
⑧
Parking brake lamp
This lam p lights up w hen the parking
brake is applied. Be sure to check that
the lamp is out w hile running.
Shibaura Europe BV
All manuals and user guides at all-guides.com
all-guides.com
