9
5.1.3.2 self-shielded welding steel wire
Terminal current holder should be connected to MIG (1). Plug polarization changes (3) in the socket (2). The positive pole of the source (5) connected to
the work piece by means of a wire with a clamp. Plug the device into a power outlet 230V 50Hz.
5.1.3.3 Welding type handle Spool Gun (optional)
Terminal current holder should be connected to MIG (1). Plug polarization changes (3) in the socket (5). The negative pole of a source (2) connected to
the work piece by means of a wire with a clamp. Plug the device into a power outlet 230V 50Hz. Press (F) switch control.
5.2 Connection shielding gas
1. Attach the bottle and secure it against tipping.
2. Remove the cylinder valve briefly to remove any impurities.
3. Install the regulator on the cylinder.
4. Connect the hose with a discharge gas regulator (7) to the rear of the welder.
5. Remove the cylinder valve and regulator.