4
3. GENERAL DESCRIPTION
DIGIMIG 225GDS synergic welding is used for manual welding of steel and non-ferrous metals. Allows MIG / MAG, MMA (coated electrode) and Lift
TIG. It can also be used to braze thin (3mm) galvanized sheets. By changing the polarization unit can be welded by MIG / MAG welding with the use of
standard wire in the protective gases and the self-shielded flux cored wires.
The device allows connection of the handle Spool-type gun (SG) which is mounted at the mini wire feed reel and D100 steel wire or colored.
Used in the device settings synergistic upraszają its service and allow the use of welding by people with less experience and hobbyists.
The device is IGBT allowing a considerable reduction in the weight and dimensions of the welding device and an increase in efficiency while reducing
power consumption.
Welding is used in closed or covered, if directly exposed to weathering.
4. SPECIFICATIONS
4.1 welder
Power supply:
AC 230V 50Hz
Maximum power consumption:
5.9 kVA
Rated welding current: / cycle
MIG: 220A / 30%; MMA: 210A / 30%; TIG 210A / 30%
Rated voltage of no-load condition
65 V
The diameters of the spools of wire:
100mm, 200mm
Maximum current consumption:
MIG 38 A; MMA: 42 A; TIG 27 A
Mass:
13 kg
Dimensions [mm]
450 x 218 x 370
Level of security:
IP21
4.1.1 range parameter adjustment
Welding current:
MIG 50 - 220 A MMA 40 - 210 A TIG: 15 - 210 A
Welding voltage:
MIG: 17.5 - 24.7 V
Wire feed speed:
2 - 14 m / min
Inductance:
- 10 - + 10%
ARC FORCE (MMA)
0 - 10
HOT START (MMA)
0 - 10