SHERCO 2014 250 SEF-R, Workshop Manual

Page: 64 / 75

DO NOT TURN OFF THE MOTORCYCLE DURING THE DOWN
DO NOT ABRUPTLY STOP THE FLASH DOWNLOAD PROCESS
THERE IS A RISK OF IRREPAIRABLE DAMAGE TO THE COMPUTER
5- At the end of the download the fuel pump will start and the following message will appear
INFORMATION:
Confirm by clicking on this icon
6- Check to make sure that the correct calibration file was allocated by clicking on
"Identification"
Check to make sure that the file name matches the file that was downloaded
Note: Serial number information and operating hours are not reset during a calibration update.
7-Start the motorcycle and make sure that the engine parameters are normal (idle, stepper
opening, etc).
ATTENTION!
DO NOT TURN OFF THE MOTORCYCLE DURING THE DOWNLOAD
(FLASH)
DO NOT ABRUPTLY STOP THE FLASH DOWNLOAD PROCESS
THERE IS A RISK OF IRREPAIRABLE DAMAGE TO THE COMPUTER
At the end of the download the fuel pump will start and the following message will appear
INFORMATION: D
ownload was successful
Check to make sure that the correct calibration file was allocated by clicking on
file name matches the file that was downloaded
on and operating hours are not reset during a calibration update.
Start the motorcycle and make sure that the engine parameters are normal (idle, stepper
64/75
LOAD OPERATION
DO NOT ABRUPTLY STOP THE FLASH DOWNLOAD PROCESS
THERE IS A RISK OF IRREPAIRABLE DAMAGE TO THE COMPUTER
At the end of the download the fuel pump will start and the following message will appear:
Check to make sure that the correct calibration file was allocated by clicking on
file name matches the file that was downloaded
on and operating hours are not reset during a calibration update.
Start the motorcycle and make sure that the engine parameters are normal (idle, stepper