SHERCO 2014 250 SEF-R, Workshop Manual

Page: 12 / 75

Motor top end
For additional details refer to the parts catalog
Removing the cylinder head:
•
Remove the spark plug.
•
Remove the valve cover.
•
Remove the three valve cover screws.
These three screws are equipped with
rings ref: 0900.
•
Remove the cap from the
[A].
•
Remove the timing control plug
•
Turn the engine counterclockwise in
order to align the timing marks on the
crankshaft with the marks on the timing gear.
Install the special tool that locks the engine at
Top Dead Center [A] (ref 1819)
For additional details refer to the parts catalog 250 SEF-R _ 300 SEF-R
.
Remove the three valve cover screws.
s are equipped with o-
Remove the cap from the ignition cover.
Remove the timing control plug [A]
Turn the engine counterclockwise in
order to align the timing marks on the
crankshaft with the marks on the timing gear.
ecial tool that locks the engine at
Top Dead Center [A] (ref 1819)
A
12/75
A
A