SHERCO 2011 SE 2.5i-F, Owner'S Manual

Page: 88 / 146

86
REPLACING A LIGHT BULB
Replacing a headlight or driving
light bulb
- Remove the rubber protection 1
- Turn the pin 2 ,
- Withdraw the headlight unit.
- Press lightly on the bayonet bulb
- Turn counter clockwise to remove.
- Reverse the procedure to re-assemble.
- The driving light
3 is easily replaced
by removing the bulb holder from the
reflector
Removing the headlight plate
The headlight plate can be removed
very quickly.
- Unclip the left and right rubbers either
side of the forks
- Release the headlight plate upwards..
Reassembling the headlight plate
- Reverse the removal procedure.
- Make sure that the lugs
4 on the
headlight plate are securely in the
holes
5 in the front mud guard.
WARNING
L
Always use bulbs with the right wattage.
1
4
5
2
3