SHERCO 2011 SE 2.5i-F, Owner'S Manual

Page: 65 / 146

ENGLISH
63
HPERC function
Operating Time (hours)
This function makes it possible to visuali-
ze the operating hours of the vehicle. It is
not possible in normal time to modify this
value or to give to zero this information.
The representable largest value is 9.999
hours, exceeded such a value, the meter
east gave to zero.
Fig9 HPERC function
RPM function
RPM engine
This function makes it possible to visua-
lize in real time, the engine speed in
tr/min.
Set up
Adjustement of wheel circumference
The modification to the wheel circumfe-
rence, units of measurement and number
of wheel impulses can only be effected
while stationary, maintaining the button
pressed under the TOD function until the
only information displayed is the wheel
circumference and all the other seg-
ments are off (see Fig.11).
It is possible to modify the various figu-
res constituting the value for the wheel
circumference, starting with the largest
figure and moving successively to the
lesser one; depending on the digit selec-
ted, a brief pressure on the button will
increase the figure by one, whilst a lon-
ger pressure will enable the selection of
a different figure.
Fig10 RPM Function
Fig11 set up
adjustement of wheel circumference
ENDURO
Set up: 2191
SUPERMOTARD
Set up: 1855