SHERCO 2011 SE 2.5i-F, Owner'S Manual, Page: 83 / 146

ENGLISH
81
- Remove the filter with its housing.
- Separate the filter from its housing.
- Clean the filter foam with a suitable
detergent. (NEUTRAL)
Do not use solvent or petrol !
- Dry the filter element.
- Spray the air filter with air filter product
oil until it achieves a uniform color.
- Replace the filter element in its housing
with care Make sure that the three lugs
4 are properly located
- Apply a thin film of grease to the air
filter seal.
- If necessary clean the inside of the air
chamber with a cloth.
- Replace the filter and its housing,
taking care to centre it correctly.
- Replace the blocking part
3 (See
previous page) by inserting it first into
the filter assembly and then into his
support.
- Replace the seat forwards, making
sure that the recess
5 is located in the
tab 6 of the tank and the tongue is under
the tank.
- Lock the screw by turning it one quar-
ter turn clockwise.
4
5 6
4 4