SHERCO 2011 SE 2.5i-F, Owner'S Manual, Page: 69 / 146

ENGLISH
67
CHECKING THE BRAKES LEVELS
Checking the front and rear brake
fluid level
- With the brake reservoir in a horizontal
position, the brake fluid should be able to
be seen in the observation window
- The fluid should be between the two
arrows as shown in the diagram below.
It should be nearest to the upper arrow.
Topping up the front
and rear brake fluid
- Hydraulic fluid is highly corrosive, it can
be harmful to the skin.
- Please read the recommendations on
the container carefully.
- Loosen the two screws
- Remove the cap and its diaphragm.
- Fill the reservoir with DOT4 brake fluid
- Replace the diaphragm, the cap and
the two screws
WARNING
K