SHERCO 125 SE-R 2017, Workshop Manual

Page: 31 / 49

31
ENGINE PART CONTROL
❱❘
Clapper box, pipe intake sleeve
- Over time, the carbon tabs gradually lose their
elasticity, which in turn causes a loss in power.
- Replace the worn or damaged gearbox.
- Verifier the condition of the intake sleeve,
especially if it is not split.
❱❘ Clutch
- Stop [8]: Verify the state of wear
- Rod [1]: Verify its state of wear Minimum length: 162.5 mm
- Springs [14]: Verify their length. Minimum spring length 37.5 mm. Replace the 6 springs as needed.
- 8 lined discs [12]: Standard thickness: 2.95 mm / threshold thickness: 2.7 mm / deformation threshold: 0.3 mm
- 7 smooth discs [11]: Standard thickness: 1.4 mm / threshold thickness: 1.3 mm / deformation threshold: 0.3 mm