SHERCO 125 SE-R 2017, Workshop Manual

Page: 12 / 49

125 SE-
R
12
ENGINE REMOVAL / ASSEMBLY
❱❘ Reassembly of the engine into its frame
For the reassembly step, proceed in the opposite order from disassembly, in complying with the tightening
torques of both screws and nuts:
Engine screws: 60 N-m
Oscillating arm nut: 100 N-m
Clutch slave cylinder screws: 10 N-m
Cylinder head-frame screws: 23 N-m
- Remove the two M4 screws and withdraw the
valve pulley cover plate.
- Place the
mapping contactor in the “Soft”
position (toward the left) and place the
motorcycle contact switch in the ON position.
Wait for completion of the electric engine valve
initialisation and its subsequent shut-off.
Turn off the motorcycle contact switch and
check that the pulley is correctly positioned
facing left.
- Proceed with the left cable tension adjustment
[1] so as to remove all slack from the pulley.
SOFT POSITION
1