SHERCO 125 SE-R 2017, Workshop Manual

Page: 11 / 49

11
ENGINE REMOVAL / ASSEMBLY
❱❘ Engine removal
-
Drainage (see User’s Manual)
• Motor oil
• Coolant
- Remove the saddle.
- Disconnect the battery.
- Unhook the tank using its louvres.
- Disconnect the wire harness attached to the engine (starter lug, anti-parasitic device).
-
Remove the exhaust (see User’s Manual).
- Remove the carburettor.
- Remove the secondary transmission chain (quick fasteners).
- Remove the chain protection.
- Remove the clutch slave cylinder.
- Remove the water hoses connected to the engine.
- Remove the left side radiator.
- Unscrew the entire set of engine screws.
- Loosen the oscillating arm shaft.
- Remove the cylinder head-frame retaining brackets and corresponding electric engine.
- Remove the engine shafts.
- Remove the oscillating arm shaft.
- Unhook the valve cables from their pulley.
- Remove the engine.
CAUTION
Once the clutch slave cylinder has been removed, the piston is no longer being maintained. Hold the piston pressed
down using a plastic collar.