13
Operations: Enter
REC→RECEIVED→NEW→UP OR DOWN to the LIST NO
submenu (maximum is 3 message)
。
Precondition : must enable
in Advance /Call
service
Note: User can switch from a hands-free call to handset by picking up the
handset. To switch from a handset call to a hands-free call, press hands-free
button, and then hang up the handset.
4.2.4 Call Hold
Pressing the HOLD button during current conversation enables you put an
active calling on hold temporarily
while a second call is answered or made,
press this button again will go back to the previous call.
Precondition : must enable
in Advance /Call service
4.2.5 Call Transfer
Press the TRANSFER button enables users could transfer an incoming call to
the third party‘s number. When user A and user B both sides are on
conversation, Users A press <TRANSFER > button ,and then dial the thid
party user C . User A will hand up . User C ring , User B is on
Hold state. User C pick up ,and talk with user B .
Precondition : must enable
in Advance /Call
service
Process: Transfer the third party number
Example:A is talking with B , A press <Transfer> button and dial C number. A
line break, then B will talk with C.
4.2.6 Three-Way Calling
IP phone support three-way (or conference) Calling. That is users could talk
to more than one person (up to two) at the same time.
Process: press HOLD button →Dial third party‘s number->put through→ press
HOLD button again →Press * button
Once the three-way initiator concludes the three-way calling, the other two
sides can not continue the conversation call and hand up automatically.
