7
‗ON‘
4) Remove the LAN cable for Internet connection from your PC and
connect it to WAN port, then follow below installation checking way
5) If need to set up small LAN network, find the LAN cable in the box and
connect between LAN port and your PC (PC is not required to set up
for making a call)
2.4 LCD Iron definitons
JR168-900 IP Phone has a 80mmx40mm LCD that can display three lines of
below characters each. Here is the display when all segments illuminate:
The LCD is equipped with a backlight. When the phone is in the normal idle
state, the backlight is off. Whenever an event occurs, the backlight turns on
automatically and brings the user‘s attention. The definitions for each character
displayed on LCD described as below table.
Icon
LCD Icon Definitions
Network Status Icon: FLASH in the case of Ethernet link
failure or the phone is not registered properly.
Network Status Icon: ON when Phone work on DHCP
mode and FLASH when DHCP client is not registered
successfully. OFF when Phone is work on another mode.
Network Status Icon: ON when Phone work on Static
mode and FLASH when IP address is disable. OFF when
Phone is work on another mode.
Network Status Icon: ON when Phone work on PPPoE
mode and FLASH when PPPoE is not registered
successfully. OFF when Phone is work on another mode.
Message Status Icon: ON and Flash if Phone has new
message include text message or voice record
Missed call display ON and Flash if Phone has missed call
and not be read.