(2014-07-01)
- 69 -
H8951 3G 4G router
5 Router config
Parameter
Details
Operation
Mapping address
The new source address
after destination address is
replaced
e.g. 192.168.15.1
Mapping port
The port of destination
address after is replaced
Value area :1
～
65535
Step 5
Single click “save” icon to finish.
---END
SNAT configuration rule
SNAT is the source address translation, and its role is to translate source address of IP packets
into another address.
Step 1
Log-on WEB GUI of H8959-4GSPT Cellular router .
Step 2
Click “Forward > NAT” to open “NAT” tab.
Step 3
NAT Type select “SNAT”, Configuration interface as shown in Figure 5-47.
Figure 5-46
SNAT rule configuration
Step 4
Configure SNAT rule parameter,.
Parameter instruction as Table 5-22