H8951 3G 4G router
5 Router config
(2014-07-01)
- 45 -
Parameter
Details
Operation
start IP address
Format
：
A.B.C.D/Mask
Example
：
192.168.8.2
End IP
When
IP
pool
select
custom
configuration, configure the DHCP pool
end IP address
Manual input Format
：
A.B.C.D/Mask
Example
：
192.168.8.254
Gateway
Type
DHCP client access gateway IP source,
divided into default, br0, eth0, custom
four categories, associated interface, the
interface IP assigned to the DHCP client
as a gateway
Dropdown List
Default value
：
default
DNS Type
DHCP client access to the DNS IP
source, has a default, modem, eth0, br0,
custom and so on, generally do not
recommend to modify the configuration,
especially
under
the
dual mode
application scenario configuration is not
recommended
Dropdown List
⚫
default
⚫
modem
⚫
eth0
⚫
br0
⚫
custom
Configuring for the default
is based on DNS address
which is allocated by the
router itself
Lease Time
After the DHCP client obtain an IP on IP
lease time, the client usually renegotiate
obtain an IP address lease time in more
than half the time. IP lease time is
mainly used to release idle IP to avoid
that IP address resources are also
occupied
after the DHCP client
shutdown
Value area
：
120-86400
Units
：
seconds
Default value
：
3600
IP, MAC binding is used to assign a fixed MAC within the specified range of IP addresses
IP
Paired with the specified MAC, when a
DHCP client which MAC is bound send
a DHCP request, the IP address associated
with the MAC address binding assigned
to it. The IP address assigned even if it
has not been occupied and not assigned
to other MAC addresses
Manual input Format
：
A.B.C.D/Mask
Example
：
192.168.8.2
MAC
Configure DHCP to obtain an IP need to
specify the DHCP client's MAC address
WORD Type MAC Format
Example: 00:1A:4D:34:B1:8E
---END
